PRODUCTS
We create our chambers to individual order in all shapes and sizes, with a temperature range from -86 to 300°C. with or without hot air sterilization function, lighting available; humidity measurement, camera, etc.
The chambers can create and carry out automatic research cycles for tests carried out in accordance with standards or directives, have a notification and remote access system, and numerous interfaces for integration with other laboratory and supervisory equipment.
Our product lines
Envcheck CORE
Economical product, small-size temperature or climatic chambers with optional equipment, for continuous operation, dedicated to long-term tests and research with changing environmental conditions.
Envcheck EVOLVE
Standard product, small-size temperature or climatic chambers with optional equipment, for continuous operation, dedicated to long-term tests and research with changing environmental conditions.
Envcheck POWER
Product intended for shock temperature changes, temperature or climate chambers with optional equipment, for continuous operation, dedicated to long-term tests and research with changing environmental conditions. The product has a rate of change of over 5k/min.
Envcheck FLEX
Products made to individual orders, temperature or climatic chambers with optional equipment, for continuous operation, dedicated to long-term tests and research with changing environmental conditions. The product is characterized by the possibility of personalization, integration of any systems and comprehensive adjustment to your needs. Before production, the individual design is additionally consulted and made available for approval.
The chambers can maintain humidity in a wide temperature range and have their own water preparation and purification system for the device.
Devices equipped with self-diagnosis, energy saving and sample protection systems, e.g. a protection system against water condensation on the ceiling or a protection system against exceeding the temperature in the research space.
The chambers can be integrated with other research devices, e.g. vibration systems.
ccc
Working chamber and external casing
-
Working chamber made of stainless steelchamber made of stainless steel.
-
Outer casing made of stainless steel.
-
Internal dimensions: width 1100 mm, height 950 mm, depth 950 mm, (possibility dimensions adjustment at the design stage, we will send the design for approval before production).
-
4 stainless steel shelves, maximum load on one shelf 50 kg evenly distributed - maximum load on the shelves 100 kg, maximum load on the floor 150 kg.
-
Heated window in the door, dimensions 600 x 450 mm, (possibility to adjust the dimensions at the design stage, we will send the design for approval before production).
-
lighting of the internal chamber.
-
Integrated water tank for the humidification system.
-
Connection for direct water supply from the network water treatment system.
-
Counter of operating hours of the device as well as key subsystems / elements.
-
1 conduit on the side wall of the chamber with a silicone plug with a diameter of 148 mm.
-
1 conduit on the side wall of the chamber with a silicone plug with a diameter of 42 mm.
-
Door seal protected against freezing by heaters
-
Ceiling heating system – protection against water dripping onto the sample.
Product Description
Technical parameters
-
Temperature control range for rooms without humidity from -90 degrees Celsius to +300 degrees Celsius
-
Temperature and humidity range from -90 degrees Celsius to +180 degrees Celsius
-
Humidity control range from 10% to 98%
-
Temporary temperature stability ±0.5 degrees Celsius
-
Temporary relative humidity stability ±2%
-
Temperature resolution/sensitivity ±0.1 degrees Celsius
-
Relative humidity resolution/sensitivity ±0.1%
-
Temperature gradient 2.0 degrees Celsius
-
Minimum average temperature change rate for heating 4.0 degrees Celsius/min
-
Minimum average temperature change rate for cooling 3.0 degrees Celsius/min
-
Chamber equipped with R449A refrigerant with a GWP of 1397.
Waste
-
the chamber does not produce waste.
Requirements for the chamber's workplace
-
power; 3-phase 400V
-
transport restrictions: width ≤ 1400mm, height ≤ 2100mm..
Control
-
Manual and automatic control
-
Software-independent overheating protection
-
Software-independent protection against too low temperature
-
Controller with a 10" touch screen
-
Possibility of entering 100 own programs, each with up to 99 program steps (possibility of programming thermal-humidity cycles to ensure continuous operation)
-
Software dedicated to working with the chamber - recording data during the test, with the possibility of printing and importing it to an Excel spreadsheet (CSV files), the ability to create programs, archive, create reports, record alarms, define alarm thresholds.
-
Ethernet interface enabling connection to a computer
-
USB/LAN file transfer (FTP)
-
The chamber does not require a computer for basic operation, including creating programs, recording data, etc. The supplied software allows you to connect in remote desktop mode to the climatic chamber and download files natively via FTP.
-
Possibility to protect access with a password
-
The possibility of adjusting the leading sensors of the chamber allows for calibration of work based on another calibrated temperature sensor.